CenterPoint Fund Accounting - Minimum Wage Adjustments

Minimum Wage Video- Duration: 7 min 5 sec

 

Document #:	3095	Product:	CenterPoint® Payroll

 

In situations where you have workers that get paid using piecework or pay H-2A workers that have contracts that differ between workers and domestic workersit is necessary to make sure that they are also achieving minimum rate wages. Red Wing Software does not automatically update minimum wage rate changes for each state. You will need to do this manually.

CenterPoint Payroll maintains the Federal minimum wage rate in Setup > Payroll Details > Minimum Wage Information and also allows you to create minimum wage contracts that can be used to differentiate workers and minimum wage rages in Setup > Payroll Details > Minimum Wage Contracts. The minimum wage information is used to calculate optional minimum wage adjustments for employees not meeting state or federal minimum wage requirements. The minimum wage adjustment is done in Processes > Pay Employees > Pay Employees tab > 3. Special Adjustments tab. When the minimum wage adjustment is calculated, an additional earning is used to add the amount to meet the minimum wage adjustment. The total wages are compared to the hours worked multiplied by the minimum wage. If the employee has not earned at least minimum wage an adjustment is done and the amount is added to their earnings or if an employee is assigned a minimum wage contract and the rate is higher than the Federal/State rate assigned to an employee during a pay run an adjustment is made and the higher rate is paid.

The steps involved in setting up and performing minimum wage adjustments are:

Step 1 - Enter Minimum Wage Information(One time setup)

Step A: Federal and State Minimum Wage Rates

Step B: Optional Minimum Wage Contract Rates

Step 2 - Create a Minimum Wage Adjustment Earning (One time setup) 

Step 3- Update Existing Earnings to be Included in the Minimum Wage Calculation (One time setup)

Step 4 - Assign the Minimum Wage Earning to the Employer (One time setup) 

Step 5 - Assign the Minimum Wage Earning to the Employee (One time setup) 

Step 6 - Pay Employees with the Minimum Wage Adjustment

---

Step 1 - Setup Minimum Wage Information (one time setup)

Step A: Setup Federal and State Minimum Wage Rates

1. From the Setup menu, select Payroll Details and click on Minimum Wage Information.

2. The current Federal Rate displays. You can change this amount.
3. If your state rate is different than the Federal Rate, change your state rate.
4. Click Save.

Step B: Optional Minimum Wage Contract Rates

1. From the Setup menu, select Payroll Details and click on Minimum Wage Contracts.
2. Click New.

3. Enter the Abbreviation and Name for this minimum wage contract.
4. Enter the minimum wage contract Rate that will be paid if it is higher than the Federal/State rate when minimum wage adjustments are calculated during a pay run.
5. Click Save.

6. Repeat steps 1-4 to create all of your minimum wage contracts.
7. Click Close.
8. Select Setup > Employees.
9. Edit an employee that should be assigned to a minimum wage contract.
10. Select the Payroll tab.
11. In the Minimum Wage Contract box, select this employee's applicable contract.
12. Click Save.
13. Repeat steps 7-11 for all employees that should be assigned a minimum wage contract.
14. Click Close.

Step 2 - Create a Minimum Wage Adjustment Earning (one time setup)

1. From the Setup Menu, select Payroll Details and click on Earnings.
2. If a minimum wage earning does not exist, click New. If a minimum wage earning does exist, highlight it and click Edit.

3. Enter an Abbreviation and Name such as Minimum Wage Adjustment.
4. In the Expense Account box, select the expense account for the minimum wage adjustments.
5. Select the Include in Minimum Wage Calculation check box.
6. Click Save.

Step 3- Update Existing Earnings to be Included in the Minimum Wage Calculation (one time setup)

Any earning that you want to be included in the minimum wage calculation must be updated by following the instructions below.

1. From the Setup Menu, select Payroll Details and click on Earnings.
2. Highlight an earning to be included in the minimum wage calculation, and click Edit.
3. Select the Include in Minimum Wage Calculation check box.
4. Click Save. Repeat Steps 2-3 for each earning to be included in the minimum wage calculation.

Step 4 -  Assign the Minimum Wage Earning to the Employer (one time setup)

1. From the Setup menu, select Payroll Details and click on Employers.
2. Highlight the employer and click Edit. Select the Earnings tab.

3. Click on Earning in the upper left.
4. On the lower-left, check the box for the Minimum Wage Adjustment earning. This will add the earning to the list above.
5. In the Earning Information, click to select the Minimum Wage Adjustment Earning.
6. Select the Minimum Wage Adjustment earning from the upper list of earnings. The Earning Information will display to the right.

7. In the Earning Details, enter the Expense Account for the Minimum Wage Adjustment earning.

8. Click Save.

Step 5 - Assign the Minimum Wage Earning to the Employee (one time setup)

1. From the Setup menu, click on Employees.
2. Select the Employee to add the Minimum Wage Adjustment Earning to and click Edit. Select the Earnings tab.

3. On the upper-left, select the Employer. Below, select the Minimum Wage Adjustment earning to assign the earning to the employee. This will add the earning to the list above.
4. Select the Minimum Wage Adjustment earning from the upper list. The Earning Details will display to the right.

5. Unselect the Display in Pay Employees Grid box.
6. In the Rate box, leave the rate at zero. Enter/verify the earning information.
7. Select the Payroll tab.
8. In the Employer Selection, highlight the employer.
9. In the Pay Information, fill in the Tax State.
10. Select the Taxes tab.
11. On the upper-left, select the employer. Below, select the state for this employee. This will add the state taxes to the list above. Click the + beside the state to expand the list of State taxes. Select the State Withholding. The Tax Details will display to the right.
12. In the Tax Detail, enter/verify the state information. If the employee does not have to pay state tax, the state tax must be added on the Taxes tab and the Use Alternate Flat Tax check box should be selected with a rate of zero.

13. Click Save.

Step 6 - Pay Employees with the Minimum Wage Adjustment

The Minimum Wage Adjustment is performed during the Pay Employees process. For step-by-step instructions on processing a pay run see the Process a Payroll topic.

1. Select Processes > Pay Employees or Processes > Payroll > Pay Employees. Click New.
2. Enter the pay run information on the 1. Select Employees tab and 2. Enter Pay tabs as usual.
3. Click the 3. Special Adjustments tab. Verify the Minimum Wage Adjustment is selected.
4. The Pay Period date range displays in the From/To boxes, any date range within the pay period range can be selected.
5. All employees will display on the 3. Special Adjustment tab. Select all of the employees by clicking on the first employee and then holding the Shift key while you click the last employee. Release the Shift key.
6. Click Calculate.
7. In the Minimum Wage Earning box, select the earning setup for minimum wage adjustments and click OK.
8. At the Replace any existing Minimum Wage adjustments? message, select Yes to overwrite any existing adjustments or select No if you want to make more than one adjustment for an employee in the pay period range, for example one per week (the state of Oregon requires minimum wage to be calculated weekly).Adjustments are shown summarized in the grid, with one row per adjustment type.

• In this example, the employee’s piece rate was $.10; the minimum wage was set to $7.25, and the employee worked 40 hours and had 2000 pieces. So, CenterPoint Payroll lists the employee as needing a minimum wage adjustment.

• The first time you click Calculate, you will be prompted to enter/select the Minimum Wage Adjustment earning, and then click OK.
• At the Replace any existing Minimum Wage adjustments? message, select Yes to overwrite any existing adjustments or select No if you want to make more than one adjustment for an employee in the pay period range, for example one per week (the state of Oregon requires minimum wage to be calculated weekly).Adjustments are shown summarized in the grid, with one row per adjustment type.

• The employee’s minimum wage adjustment details display.
  • For example, the minimum wage adjustment calculates $90.00 - 40 hours x $7.25 = $290.00. $290.00 – 200.00 (2000 x .10) = $90.00).

• For example, the minimum wage adjustment calculates $77.76 - 32 hours x $8.68 (minimum wage contract rate which was higher than the Federal/State minimum wage amount of $7.25) = $277.76 - $200.00 ($6.25 hourly rate x 32 hours) = $77.76.

9. The employee’s minimum wage adjustment details display. If an employee has earnings associated with different taxing states, the minimum wage for each state will be calculated and displayed sorted by state.
10. The Special Adjustments report can be previewed for the current pay run from this screen by clicking Preview. When clicked, any changes made to the pay run up to that point will be saved and the Special Adjustments report will display. Changes made to this version of the report will not be saved and cannot be stored as a favorite. If you want to customize this report, you should print the report via the Reports > Payroll Data Reports > Payroll Totals > Special Adjustments or Prepayment Reports tab instead.
11. Continue to Process and Post the pay run as usual.

See Also